Product ID:HEAT-SHRINKABLE POLYMERIC PRODUCTS
MSDS Date:04/01/1991
FSC:5970
NIIN:00N033380
MSDS Number: BPBFL

RAYCHEM CORPORATION

300 CONSTITUTION DRIVE
MENLO PARK, CA 94025
US

Emergency Phone: 415-361-4907

Info Phone: 415-361-4907

Preparer: DONNA SEID

Cage: 06099

RAYCHEM CORPORATION

MENLO PARK, CA 94025 US

Telephone: (415)361-3333

Cage: 06099

CHLOROPOLYMER

POLYAMIDE

POLYESTER

SILICONE

AN ADEQ SUPPLY AT FRESH AIR TO AVOID O*2

RTECS: 9999999ZZ

OR MASTIC CONTACTING SKIN/EYES, USE

RTECS: 9999999ZZ

HANDLE GROSSLY OVERHEATED OR FIRE-DAMAGED PRODS,

RTECS: 9999999ZZ

CORROSIVE INORGANIC ACID RESIDUES.

RTECS: 9999999ZZ

BASE POLYMER (CONSISTING OF INGREDIENTS 2-8)

RTECS: 9999999ZZ

POLYETHYLENE COPOLYMER

CAS: 9010-77-9

OLEFIN COPOLYMERS

FLUOROPOLYMER SOLIDS;(FLUOROPOLYMERS)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IN COMMON WITH MOST ORGANIC MATERIALS,
DEGRADATION & COMBUSTION BY PRODUCTS MAY BE TOXIC & SHOULD NOT BE
INHALED. OVERHEATING OF THE PRODUCT TO CHARRING OR BURNING WILL
PRODUCE FUMES THAT MAY CAUSE E YE, SKIN, NOSE AND THROAT
IRRITATION, HEADACHE, DIZZINESS, NAUSEA, & IN ABSENCE OF
VENTILATION, POSSIBLE ASPHYXIATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH WITH WATER FOR AT LEAST 15 MINS. SKIN:IF MOLTEN
ADHESIVE/MASTIC CONTACTS SKIN, COOL IMMEDIATELY WITH WATER. DO NOT
ATTEMPT TO REMOVE MATERIAL FROM THE SKIN-TREAT AS BURN AND GET MD.
INGEST:R EMOVE TO FRESH AIR. GET MD IF ANY BREATHING PROBLEMS
DEVELOP.

Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . TOXIC FUMES MAY EVOLVE IN A FIRE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID HEATING PRODUCTS BEYOND
TEMPERATURES REQUIRED FOR NORMAL INSTILLATION.
Other Precautions:IF PRODUCTS CHAR OR BURN, IMMEDIATELY STOP HEATING.
AVOID INHALING ANY FUMES WHICH MAY EVOLVE UNDER SUCH CIRCUMSTANCES.
ALLOW ANY FUMES TO DISPERSE AND VENTILATE BEFORE CONTINUING WORK IN
THE AREA.

Respiratory Protection:IF INSTALLATION OCCURS IN A CONFINED,
UNVENTILATED AREA, NIOSH/MSHA APPROVED RESPIRATORS ARE RECOMMENDED.
Ventilation:I/A/W GOOD INDUSTRIAL HYGIENE PRACTICE, ENSURE VENT ADEQ TO
CNTRL EXPOS BELOW STATE & FED PELS DURING (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:TO BE BASED ON OPER FORMED, FOLLOWING OSHA,
ANSI, OR NIOSH GUIDELINES. IF THERE IS DANGER OF MOLTEN ADHESIVE
(ING 10)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
APPEAR/ODOR:SIZES & COLORS. NO ODOR. HAZ DECOMP PRODS:OLEFINS & NO*X,
PO*X, & SO*X. WASTE DISP METH:REFER TO PRODUCT LITERATURE FOR
IDENTIFICATION OF FLAME-RETARDANT PRODUCTS. DISPOSAL MUST BE I/A/W
F EDERAL, STATE & LOCAL REGULATIONS . VENT:INSTALLATION. WHEN USING
GAS TORCHES IN CONFINED SPACES, ENSURE (ING 9)

Appearance and Odor:PLASTIC TUBING, WRAP-AROUND SLEEVES/MOLDED PARTS IN
VARIETY OF SHAPES, (SUPDAT)

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:AVOID OVERHEATING OF PRODUCT.
Hazardous Decomposition Products:CO, CO*2, ALDEHYDES, ACETIC ACID, LOW
MOLECULAR WEIGHT HYDROCARBONS, SIO*2, HCL, HFL, HYDROGEN BROMIDE,
FLUORO- (SUPDAT)

Waste Disposal Methods:ALL PRODS ARE CLASSIFIED AS NON-HAZ WASTE &
SHOULD BE BURIED/INCIN AT APPRVD SITES. IF THERE ARE LOC REGS
COVERING CNTRLD INCIN OF HALOGENATED MATLS, THEN ALL FLAME-RETARDED
PRODS, W/EXCEPTION OF ZERO HAL, PRODS WILL BE SUBJECT TO SUCH REGS.
(SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.